Hifi-Passion

New Arrivals

Aful Perfomer 8S - Hybrid In-Ear Headphones

The new multi-driver hybrid in-ear monitor from AFUL. The new Performer 8S was developed as an upgrade to the highly acclaimed Performer 5 and Performer 8 models and has been completely redesigned with a new Quadbrid driver architecture. It features an amazing configuration with 1 DD, 6 BA, 1 passive radiator, and 1 microplanar magnetic driver on each side.

High-performance hybrid IEMs with multiple drivers
1DD+6BA+1 passive radiator+1 microplanar driver
Innovative, adjustable passive radiator design
High-precision, 3D-printed acoustic channels
RESInators micro-resonance technology
Professionally developed RLC network crossover correction design
High-damping pressure equalization technology
Elegant design inspired by the echoes of Jupiter
True hi-fi acoustic response, precise reproduction of the entire frequency range
Full, rich, slightly warm sound
Two bass modes
Ergonomic, lightweight, and comfortable design
Easy to drive
Silver-plated 4N single-crystal copper plus 6-wire single-crystal copper cable

iBasso Kunlun - GaN desktop headphone amplifier

8 GaN FETs
40 transistors
7400 mW + 7400 mW at 32 Ω
Linear power supply
DC protection
State-of-the-art components
Single-ended and balanced inputs/outputs
4-channel TI volume control
CNC aluminum housing

Groundbreaking GaN desktop amplifier - The pinnacle of sound quality

As the first manufacturer to use GaN in a highly affordable desktop headphone amplifier. GaN FETs feature electron mobility (up to 2000 cm²/Vs) that surpasses conventional MOSFETs and silicon transistors, offering higher electron speeds and lower conduction losses at high frequencies. GaN FETs have significantly lower parasitic Miller charge (QGD) compared to equivalent Rds(on) power MOSFETs, enabling faster switching speeds. When used in audio amplification, this results in improved transient response, dynamics, and control.

Thieaudio Hype4 MK II - Hybrid in-ear headphones

Improved 2DD+4BA hybrid IEM
2x Impact2 dynamic drivers 4x imported Knowles drivers
Precise 4-way crossover
Responsive + neutral studio tuning
CNC aluminum housing
2-in-1 modular cable, 4.4 mm and 3.5 mm plugs

Completely redesigned for more power

The HYPE 4 MKII isn't just a retune—it's been redesigned from the ground up. With brand new balanced armature drivers from Knowles, the second-generation IMPACT2 subwoofer system, and a new technical approach, the HYPE 4 MKII takes a giant leap forward in both sound and technology.

FiiO M27 - Flagship high-resolution player

Snapdragon 778G octa-core CPU
8 GB RAM
128 GB storage
Two high-speed TF/ SD card slots
Two top-of-the-line DACs ES9039MPRO
Standard coaxial + fiber optic output interface
5000 mW + 5000 mW output power Sixth-generation
FPGA + RIVER femtosecond quartz oscillator
Lossless Bluetooth QCC5181
XMOS XU316 (16 cores)
9200 mAh high-temperature safety battery
Multifunctional air-cooled heat dissipation base

FiiO Warmer R2R - Desktop tube preamplifier and DAC

USB/OPTICAL/COAXIAL inputs
RCA+XLR line inputs
Fully differential, true 24-bit R2R resistor array
DAC Four JJ Electronic E88CC tubes
46W low-noise, linear power supply with low ripple
Dual-channel, mechanical VU meters with LED backlighting

FiiO BR15 - High-Resolution Bluetooth Audio Receiver

Qualcomm QCC5181 Bluetooth 6.0 receiver
LDAC, aptX Lossless, aptX Adaptive 96kHz/24-bit
Fully-differential 24-bit R2R DAC with 192 thin-film resistors
NOS/OS modes
Bluetooth, USB, coaxial, and optical decoding
RCA and XLR line outputs
Coaxial and optical digital outputs
Global 10-band PEQ with AUTO EQ support
Fully-balanced audio circuit
Pop-noise elimination system
AC/DC dual power design with automatic DC priority
1.47-inch color LCD display
Infrared remote + FIIO Control app support
Hi-Res Audio and Hi-Res Audio Wireless certifications

Shanling UA7 - Portable DAC/AMP

Two JAN6418 vacuum tubes
ESS ES9069 Hi-Fi DAC Advanced OP + BUF amplifier design
Support for high-resolution audio formats: PCM 768 kHz / 32-bit, DSD512
Two output connectors: 3.5 mm single-ended and 4.4 mm balanced
Customizable via companion app

Hisenior Mega7 - Hybrid in-ear headphones with 7 drivers

Brand new, powerful multi-driver hybrid IEMs
1DD+6BA driver configuration per side
Brand new dynamic 10 mm driver with dual bio-cell diaphragm
Completely new DE537R acoustic structure (10 mm DD+SONION (37AP+E50), Knowles (2xRAB) balanced armature drivers)
Precisely manufactured 4-way crossover system
Four independent acoustic tubes
Super-comfortable fit with APRM (Air Pressure Release Mechanism)
Ergonomic and comfortable design High-quality
Orca 4 6N-UPOCC copper stranded cable
4.4 mm to 3.5 mm adapter included

iBasso Jr. Macchiato - Portable USB DAC/AMP

Two CS43131 flagship DACs
580 mW + 580 mW at 32 Ω, fully balanced amplifier, extremely low noise level
Femtosecond crystal oscillators
PCM32bit/384kHz, Native DSD256
0.96-inch OLED screen
Button control
Android APK and parametric 8-band EQ
Microphone support
4.4 mm + 3.5 mm dual outputs
Silver-plated mono crystal copper USB-C to C cable
UAC1.0+UAC2.0 dual protocols

FiiO FT13 - Closed-back headphones

Natural purpleheart wood
Large dynamic 60 mm driver
Diaphragm made of wool composite nanofiber wood
W-shaped diaphragm
Closed design
U-shaped damping tube
Low impedance, high sensitivity, easy to drive

Furukawa monocrystal copper + silver-plated, oxygen-free copper braided cable
Lambskin/suede ear padssuede included
4 detachable audio plugs included
Yaoli linen storage bag

iBasso D17 Atheris

R2R+1bit dual discrete DAC + dual Nutubes headphone amplifier

A new benchmark for portable DACs and amplifiers

284 high-precision film resistors with a low temperature coefficient of 0.01% (25 ppm)
Two Nutube 6P1 vacuum tubes with a lifespan of up to 30,000 hours
Custom-made 24-step 4-stage step attenuator with a channel tolerance of less than +/- 0.1 dB
Two Accusilicon femtosecond quartz oscillators with extremely low phase noise. Professional audio DSP chip with a theoretical dynamic range of up to 192 dB and a THD+N value of -174 dB
Ultra-low-noise analog power supply with a noise level of only 0.6 μV, which is below the 0.8 μV of Linear Technology's LT304x
Dual battery architecture with separate batteries for powering the digital and amplifier sections. Custom-made film capacitors and vintage SPRAGUE capacitors from iBasso
1.3-inch OLED display

FiiO K13 R2R

24-bit fully balanced R2R desktop DAC and headphone amplifier

Fully differential true 24-bit R2R DAC resistor arrays
NOS/OS dual modes
2400 mW + 2400 mW powerful output power
LDAC Bluetooth
DC/AC dual power supply
10-band high-precision PEQ
Fully balanced audio amplifier circuit
XLR+RCA preamp/line output

FiiO K15 - Desktop DAC AMP headphone amplifier with two AK4497S

Two AK4497S VELVET SOUND DAC chips
Discrete Class AB transistor amplifier with 3000 mW + 3000 mW output power
Fully symmetrical audio circuit from input to output
Supports USB DAC (768 kHz/32-bit), DSD512, and full MQA decoding
Bluetooth decoding with LDAC/AAC/SBC
10-band PEQ equalizer support for all digital inputs
Dual master clock, Accusilicon crystal oscillator with extremely low phase noise
Multi-core X2000 processor and ESP32-S3 MCU for a fast and smooth user experience
Supports playback from USB storage devices, Roon Ready, AirPlay streaming
Supports Wi-Fi 2.4/5 GHz Wi-Fi and Gigabit Ethernet
Advanced thermal design and physical separation of power, digital, and analog boards
3.93-inch touchscreen
Infrared remote control
Hi-Res Audio

The FiiO K15 is a top-of-the-line desktop DAC and headphone amplifier that combines modern digital decoding and analog precision.

Thieaudio Monarch MKIV

2DD + 6BA + 2EST Flagship IEM

2x Dynamic, 6x Balanced Armature + 2x Electrostatic drivers
Successor to the Thieaudio Monarch MKIII
Features adjustable tuning switch for versatile sound
Premium aluminum alloy shell
Includes Thieaudio's latest modular cable system with 4.4mm + 3.5mm plugs

Custom Tuning at Your Fingertips

Switch between studio-neutral and basshead tunings whenever you want.

For the first time in Thieaudio’s Signature Series lineup, the Monarch MKIV (Mark Four) comes with an adjustable tuning switch.

FiiO FT7 - Open planar headphones

106 mm planar driver
Patented gold+silver multi-layer coating
1μm thin special membrane
Zebra wood grille
Uniform magnetic field 18x N52 neodymium magnets per driver
427g lightweight
Carbon fiber construction
2 different ear pads included
Liquid nitrogen-frozen monocrystalline copper cable
Custom Yaoli linen storage bag

FiiO FX17 - Hybrid 13-driver flagship in-ear headphones

1DD, 4BA and 8EST design on each side
Eight electrostatic Sonion drivers
Four custom Knowles BA drivers
Dynamic driver with 10mm lithium-magnesium alloy diaphragm
Electronic and physical five-way crossover
Patented S.Turbo acoustic design
Titanium construction with gold, silver and copper cables
Exclusive serial number nameplate
Three interchangeable Termination audio plugs included
22 Pairs of Ear Tips including SpinFit, FiiO HS18 and FiiO HS20 Tips
Hi-Res Audio Certified

FiiO K17

Desktop AK4191 dual AK4499EX DAC AMP headphone amplifier

Flagship DAC system: Two AK4499EX DAC chips with AK4191High
Output power: 4000 mW balanced output and 4000 mW in ultra-high gain mode
31-band PEQ: High-precision parametric equalizer
Advanced power supply: Dedicated, low-noise power supply with separate analog and digital circuits for optimal performance
Fully balanced design: Ensures excellent channel separation and reduced crosstalk, improving overall sound quality
Multiple inputs and outputs: Supports USB, optical, coaxial, analog inputs and provides balanced and unbalanced outputs
Roon Ready certification: Fully compatible with Roon for high quality music streaming
Touchscreen and remote control: A 3.93-inch LCD touchscreen and the included infrared remote control ensure easy operation