Ibasso AMP12 Headphone Amplifier Module for iBasso DX300 Hi-Res Audio PlayerWith 4.4mm balanced headphone output and 4.4mm balanced line-out output

iBasso AMP133CH Vacuum Nutube Amp Card with 2 x 3,5mm outputs, one for tube purists with "low noise output" (2,5Vrms) and the second for maximum power (4,1Vrms).The sixth Korg Nutube generation was built in.Now you can enjoy tube sound on the go with this amazing module.In combination with the iBasso DX320 or DX300 which have a separate circuit for analogue amplification, you are able to get the maximum sound out of the iBasso AMP13.

Hybrid JAN6418 Tube/Solid-State AMP16 amplifier card for use with the DX340 Dual Raytheon JAN6418 tubes: Military-grade pentode tubes with an anode voltage of 22.5V, delivering a rich, analog sound with a natural soundstage. TUBE + Class AB dual modes: Switch between classic tube warmth and pristine transistor clarity and enjoy a versatile sound. Powerful output: 2000mW + 2000mW @ 32Ω (12V DC-IN) via a balanced 4.4mm output that will drive any headphone with ease. Luxurious circuitry: Two tubes, four TI op-amps and four Texas Instruments BUF634A buffers provide exceptional sound refinement. JRC Volume Control: 100-step hardware adjustment suppresses noise and improves precision. Hand-Matched Tubes: Each pair of tubes is rigorously tested in an APx555 analyzer to ensure unsurpassed audio quality. AMP16 At the heart of the AMP16 are the two Raytheon JAN6418 triodes, strategically placed in the voltage gain stage to maximize sound. These tubes provide effortless amplification with minimal feedback, preserving the integrity of the signal and enhancing musicality. A JRC analog volume control provides precision, while BUF634A op-amps drive the balanced output with power and clarity. The AMP16 supports both tube and solid-state modes, offering versatile sound signatures. The 12 V DC input increases headroom and dynamics, making it a powerhouse for IEMs and high-impedance headphones alike.Specifications: Model iBasso Audio AMP16 Product type Amplifier card (DX340 exclusive) Tubes Dual Raytheon JAN6418 ( manually selected) Circuitry 4x TI Op-Amps + 4x BUF634A Buffer Modes TUBE / Class AB (switchable) Outputs 4.4mm Balanced + 3. 5mm single-ended (Pentaconn) Power supply 12V DC-IN Supports Class AB - 4.4mm balanced output: 8.3Vrms (Super Gain), 2000mW @ 32Ω (12V DC-IN); THD+N: -117dB; SNR: 122dB Class AB - 3.5mm single-ended output: 4. 1Vrms (Super Gain), 500mW @ 32Ω (12V DC-IN); THD+N: -108dB; SNR: 120dB TUBE - 4.4mm balanced output: 7.5Vrms (Super Gain), 1500mW @ 32Ω (12V DC-IN); Freq. Frequency response: 20Hz-40kHz +1dB TUBE - 3.5mm single-ended output: 3.75Vrms (Super Gain), 400mW @ 32Ω (12V DC-IN); Freq. frequency response: 20Hz-40kHz +1dB Package contains: 1x AMP16 amplifier card *Note: DX340 player and 12V DC-IN power supply are sold separately. Requires DX340 firmware V1.02.279 or higher.

AMP17 module for DX340 The latest amplifier card from iBasso for DX340. AMP 17 features a Class AB amplifier with advanced circuitry, a 4.4 mm TRRRS headphone output, and a 4.4 mm TRRRS line output with up to 2 watts of output power. Exceptional GaN discrete amplifier card for high-end portables The iBasso AMP17 is a real breakthrough in portable amplification because it combines gallium nitride (GaN) FETs with precise discrete transistors. This amplifier card was developed specifically for the flagship DX340 digital audio player and offers unbeatable performance in a compact, modular format.As the first GaN-based headphone amplifier card in the iBasso range, it offers ultra-fast switching, minimal line loss, and significantly improved transient response. Whether you're driving low-impedance IEMs or demanding full-size headphones, the AMP17 delivers clear, layered sound with absolute stability, even during intense music passages. High power and low impedance: With its balanced 4.4 mm output, the AMP17 delivers up to 1030 mW per channel when battery powered and an impressive 1900 mW per channel at 32 Ω when using an external 12 V DC adapter – ideal for high-impedance headphones or immersive listening experiences. Audio precision and low distortion: Designed for a frequency response of 10 Hz to 40 kHz, a SNR of 122 dB, and a THD+N of –116 dB (no load), this amplifier card improves sound detail, clarity, and dynamic range. Combined with an output impedance of <1.1 Ω and extremely low crosstalk (<117 dB), the AMP17 preserves signal fidelity and ensures that every nuance of your music is reproduced faithfully. Advanced GaN advantages: GaN transistors offer electron mobility of up to 2000 cm²/V·s – far exceeding that of silica devices – enabling faster switching, reduced Miller capacitance, and improved zero-crossing control. These characteristics reduce distortion and ripple interference, ensuring a clean, analog-like sound with an airy soundstage and powerful dynamics. Full Support for DX300 Series The AMP17 not only supports the DX340 but is also compatible with the DX300 and DX320 players. The familiar operational logic remains unchanged, giving the impression that nothing has altered; however, the sound quality has undergone a comprehensive evolution. Note: The DX300 and DX320 do not support external 12V DC power supply.Why choose AMP17: This amplifier card is ideal for audiophiles who demand extreme performance in a portable format – whether for precise mastering, detailed listening or powering flagship headphones. The combination of GaN and discrete circuitry makes the AMP17 a technological advance in portable audio amplification. Specifications Compatibility DX340, DX300, DX320 (modular AMP slot) Technology GaN FETs + discrete transistors Power supply: Battery; +12 V DC adapter (DX340 Super Gain) Balanced PO output (4.4 mm) THD+N: –116 dB (no load), –110 dB (600 Ω) Dynamic range: 120 dB SNR: 122 dB Crosstalk: –117 dB Frequency response: 10 Hz–40 kHz (±0.5 dB) Output impedance: 1.1 Ω Output power: 1030 mW + 1030 mW at 32 Ω (battery) Output power: 1900 mW + 1900 mW at 32 Ω (12 V DC) Balanced LO output (4.4 mm) THD+N: –116 dB (no load) Dynamic range: 126 dB SNR: 123 dB Crosstalk: –97 dB Output level: 1.6 Vrms (low), 2.6 Vrms (medium), 3.0 Vrms (high gain) Special features High-current, low-impedance output; GaN ripple suppression; zero-crossing circuit What`s in the boxAMP17 card, screwdriver, screws

Enhance your listening experience with the iBasso AMP18 – the ultimate discrete balanced amplifier cardThe iBasso AMP18 is a state-of-the-art discrete balanced amplifier card designed for the DX340 series, offering superior performance with its advanced two-stage amplifier architecture, two balanced 4.4 mm outputs, and support for high voltage fluctuations via external DC power supply. With 40 dual transistors, the AMP18 forms an impressive 80-transistor matrix that optimizes drive power, minimizes distortion, and ensures exceptional headphone amplifier performance. With its exceptional dynamics, extended frequency response, and highly linear analog output, the iBasso AMP18 sets a new standard for AMP card performance. Its cascaded current feedback circuit eliminates transient distortion while preserving the dynamic energy of your music. The complementary output stage enhances the natural analog feel and delivers a warm, rich sound without the typical dry digital sound. This design ensures symmetrical waveform reproduction and low THD+N, so every note comes through with vivid texture. The AMP18 supports a 12V DC input and delivers a massive 1740mW + 1740mW output at 32Ω, making it compatible with virtually all full-size headphones and high-end IEMs. Whether you use the balanced 4.4 mm headphone output or the dedicated 4.4 mm line output, you can count on pure, clear output for use with external amplifiers or speaker systems.

iBasso CB12s - High-quality and flexible headphone cableThe highlights of the iBasso CB12s at a glance:    Fully balanced cable - The upgrade for any good pair of headphones.    MMCX connectors - Standard compliant and fits almost any headphone    2.5 mm TRRS plug - Fully compatible with players as well    The perfect connection - Four conductors of 6N copper and four conductors of copper-silver alloy    3.5 mm adapter included - Even more flexibility with the best soundComplete symmetry for excellent, balanced soundiBasso CB12s on velvetEven though most cables with an unbalanced 3.5 mm jack connection already deliver quite a decent sound, it is only with a balanced connection that they completely blossom. The big advantage of a balanced connection: The two channels do not "see" each other electrically and therefore work completely unaffected by each other.Highest silence and noise-free sound are the reward.MMCX Connectors - Standard-Compliant and High-QualityiBasso CB12S MMCX connectorThe CB12s headphone cable from iBasso uses the standardised MMCX connector, which fits virtually any headphones with detachable cables. No experiments are dared with the source either, but the classic 2.5 mm TRRS connector is used, thus achieving maximum compatibility.High-quality inner workings, consistently constructediBasso CB12s close-upBesides the gold-plated connections on the cable, the inner conductors are also made of excellent material. For example, two conductors per side are made of monocrystalline copper, and two conductors per side are made of a copper-silver alloy, which are additionally insulated from each other by a high-quality dielectric.Despite the complex material used, the cable is pleasantly thin and extremely flexible. Microphony effects therefore have no chance.3.5 mm jack adapter included - maximum compatibility!iBasso CB12s 3.5 mm jack adapterWhen you choose a high-quality cable, you want to use it as much as possible. That's exactly why the iBasso CB12s comes with a practical (and equally high-quality) adapter from the balanced 2.5 mm jack to the unbalanced 3.5 mm jack.Intelligent and practical.What advantage do you get from a better headphone cable?iBasso CB12s with attached adapterIn contrast to the "standard cables", with the iBasso CB12s you get a cleaner, tidier sound image with clear and smoother highs, a wide stage and excellent voice reproduction.Either way, the iBasso CB12s is a great addition for any headphone lover with headphones with MMCX connectors. Give it a try!You want more? You get more!Then listen to the "big brother" iBasso CB13. This cable has basically the same construction as the CB13, but the copper-silver alloy cable used in the iBasso CB12s has been replaced by a pure silver cable.Even more stage depth and width and more stability and neutrality are the reward with the CB13.Click here for the iBasso CB13.

IEM replacement cable4.4mm Pentacon to 2 x MMCX

iBasso CB18 Type-C to Type-C OTG Connector Cable Hand braided eight core cable 10cm long Made from high purity monocrystalline silver plated copper  Hand-braided structure Stainless steel housing around connectors 24K gold plated plugs Easy to handle and simple to use The iBasso CB18 is a brand new high purity silver plated monocrystalline silver plated copper OTG to OTG connector cable designed specifically for high quality USB DACs/amps and other devices. The cable is made from high purity materials to ensure premium sound presentation and a comfortable hand feel. The cable has USB Type-C connectors at both ends. 

USB-C Y-Adapter OTGUSB-C cable: Supports various DAC decoders.Compatible: Suitable for many brands.Type C to C: Compatible with Cayin, HIBY, and FIIO.Separate power line: Improves signal quality.High quality: Durable and stable.50 cm lengthProvides an independent and pure power supplyAndroid phones severely limit the OTG output current and increase it to 5 V via a step-up converter circuit.The OTG power line generates various interferences and noises that affect the power supply to the headphones. It is obvious that the phone is not an ideal power source for headphones.To address this challenge, iBasso has specially developed the CB19 series cables. The CB19C represents the next generation of this series. With the CB19C, headphones or certain USB decoders can be powered externally and independently.By breaking the loop between the phone's power output, the headphones, and the negative pole (system ground), the CB19C eliminates EMI and noise from the phone's power supply. Even a standard or high-quality power bank can be sufficient to replace the phone's power supply.From that point on, the small device no longer consumes the phone's battery, but is powered by the CB19C with high-quality, low-noise power, allowing the small device to deliver superior acoustic performance.The CB19C's power interface also uses a Type-C interface, which can be paired with more compact and portable mobile power banks. The CB19C also extends the cable length, making the connection less restrictive and further improving the user experience.

R2R+1bit dual discrete DAC + dual Nutubes headphone amplifier 284 high-precision film resistors with a low temperature coefficient of 0.01% (25 ppm)Two Nutube 6P1 vacuum tubes with a lifespan of up to 30,000 hoursCustom-made 24-step 4-stage step attenuator with a channel tolerance of less than +/- 0.1 dBTwo Accusilicon femtosecond quartz oscillators with extremely low phase noise. Professional audio DSP chip with a theoretical dynamic range of up to 192 dB and a THD+N value of -174 dBUltra-low-noise analog power supply with a noise level of only 0.6 μV, which is below the 0.8 μV of Linear Technology's LT304xDual battery architecture with separate batteries for powering the digital and amplifier sections. Custom-made film capacitors and vintage SPRAGUE capacitors from iBasso1.3-inch OLED displayR2R+1bit dual structures A new benchmark for portable DACs and amplifiers The D17 uses iBasso's proprietary discrete R2R and 1-bit DAC. It features a four-channel, fully symmetrical R2R discrete component DAC that uses a total of 284 high-precision film resistors with an accuracy of 0.01%. R2R decoding ensures a natural, refined sound with natural analog reproduction, offering a unique, vivid listening experience. iBasso's proprietary 1-bit DAC uses 8 sets of 8E, a total of 64 PWM DACs, delivering a landscape of rich musical detail and extremely high-resolution audio reproduction. The D17 has three DAC modes NOS mode (PCM uses R2R DAC decoding, DSD uses 1-bit DAC decoding) All to R2R (OS mode, all to PCM format) All to 1 bit (SD mode, all to DSD format) Four-channel, fully symmetrical R2R architecture 284 high-precision resistors with a tolerance of one ten-thousandth The D17 features a four-channel, fully symmetrical R2R architecture and 284 carefully selected, ultra-precise film resistors with a tolerance of one ten-thousandth. Equipped with iBasso's proprietary hardware resistance compensation circuit and software compensation algorithms, the D17 achieves a THD+N of -104 dB in R2R mode, surpassing conventional R2R devices by more than ten decibels and competing with various flagship R2R desktop DACs. R2R decoding provides a rich analog sound that produces a warm, refined sound with exceptional musicality. 64 PWM DAC, 1-bit architecture Opening the door to acoustic realismIn 1-bit mode, the four channels L+, L-, R+, and R- each have 16E, for a total of 64 PWM DAC units working together. Controlled by the FPGA Master 3.0 with nanosecond-accurate I/O delay control and “wiring delay” compensation to ensure that the signal edges arriving at the DAC are aligned and strictly synchronized. This not only achieves an impressive THD+N of -114 dB, but also significantly improves sound detail and density. FPGA Master 3.0 Inside Precise nanosecond control, global clock regeneration The D17 is equipped with iBasso's proprietary FPGA Master 3.0 architecture, which is deeply integrated with two Accusilicon femtosecond oscillators with extremely low phase noise to create a pure, unified single clock source. Through high-precision nanosecond delay control and real-time clock regeneration technology, the system can simultaneously compensate for R2R decoding and 1-bit decoding, reducing clock jitter and distortion to an extremely low level. This ultimately results in highly accurate sound reproduction that ensures every detail is reproduced in its original form. Two Korg 6P1 Nutubes Fully balanced headphone amplifier with incredible performance The D17's two Nutube 6P1 tubes give the sound a unique tube character and a warm, soft yet dynamic texture. The anode is powered by a 24V high-voltage supply, which ensures better linearity. Combined with the powerful TI BUF634A buffer amplifier, this ensures a stable and powerful power supply. This allows the D17 to deliver over 1200 mW + 1200 mW at 32 Ω, easily driving a wide range of flagship IEMs and high-impedance headphones. Three-layer seismic isolation system Secondary reduction of the microphone effect The D17 features an isolation system consisting of a double-layer printed circuit board combined with damping materials. The two PCB layers are connected to each other via pin connectors, which effectively distributes and dampens lateral loads and significantly reduces resonance. The tube is mounted with damping materials on the second circuit board layer, which provides secondary reduction of the microphone effect. Actual measurements show that the microphone effect is below the threshold of human perception. It consistently ranks at the top among all iBasso tube amplifier products. Dual battery architecture demonstrates solid performance Pure sound quality at the highest level, even in complex passages The D17 features a dual battery architecture, with the DAC and headphone amplifier powered by separate batteries. This dual architecture ensures that the headphone amplifier section receives a stable power supply while effectively isolating digital interference. Whether at high gain or high load, the D17 can maintain pure and stable output, significantly reducing distortion caused by unstable power supplies. It truly delivers clear and flawless sound quality and is capable of reproducing your recordings with the highest musical quality. 24-step 4-section attenuator Analog and digital volume controls The D17 supports both analog and digital volume controls. The analog volume control uses iBasso's 24-step 4-section step attenuator, which is only one-tenth the size of a conventional step attenuator but retains all of its advantages. The difference between the left and right channels is less than +/- 0.1 dB. Digital volume control is provided by a professional DSP module. The combination of analog and digital volume control enables more precise volume output.

iBasso DC-Elite - Flagship Dongle - Miniaturized DX320MAX Using the DX320MAX as a blueprint, an outstanding flagship dongle has been createdAlong with the ROHM BD34301EKV DAC chip, 24-step 4-section attenuator, current output DAC architecture, titanium chassis and numerous state-of-the-art technologies and materials, the iBasso DC-Elite embodies the MAX standard. The integrated DX320MAX technology has created a Mount Everest dongle.Flagship DAC chip with current amplification - ROHM BD34301EKVA flagship DAC chip with current output is used for the first time in a dongle. A historic milestone is reached with the DC-Elite. ROHM's BD34301EKV DAC, together with carefully designed circuitry, improves the dynamic range, expands the soundstage and enhances the high-fidelity audio capabilities of the DC-Elite.24 positions, 4 sections, stepped attenuatoriBasso has completely redesigned the traditional 24-position, 4-section attenuator by compressing the volume to one-tenth the size of the original attenuator while ensuring that the tolerance of channel imbalance is less than 0.1 dB. iBasso pioneered the use of this attenuator in the DC elite, specifically designed for the DX320MAX. Say goodbye to the problem of bit reduction in digital volume control. At normal volume with a 32 Ω load (approximately 50mV-100mV output), the DC-Elite's SNR is the leader among dongle products.Complete flagship player structure, it is invincibleThe DC-Elite has a complete FPGA->DAC->I/V->LPF->VOL->AMP architecture. Equipped with 6 dual OPAMPs and designed around the flagship DAC chip BD34301EKV, this compact device delivers exceptional playback performance. The structure of the DC-Elite sets it apart from the competition. It pushes the boundaries of design and achieves a significant improvement in sound quality, demonstrating an unprecedented level of innovation and excellence.In-house developed FPGA with NDK fs oscillatorThe DC-Elite utilizes the advantages of our in-house developed FPGA algorithm. By using the NDK femtosecond oscillator, exceptionally low jitter is achieved, resulting in minimal distortion and a significant improvement in musical sound quality.Various advanced power supply technologies deliver clean and reliable powerThe iBasso DC-Elite not only features a highly efficient power supply with a synchronous DC-DC converter, but also extremely low-noise LDOs from Linear Technology, previously only used in flagship audio players. At just 0.8 μV, the noise is even lower than that of battery power supplies in most cases. In addition, the output current reaches an impressive 500 mA, which guarantees a sufficient and unadulterated power supply for the DAC.Outstanding sound quality, efficient control of power consumptionThanks to its exceptional internal circuit design, the iBasso DC-Elite has an impressive power consumption despite having a flagship desktop-level DAC and a comprehensive player architecture. With a balanced power consumption of 690 mW and a single-ended power consumption of 630 mW, this device offers significant advantages over other flagship models in its class. These unique features set it apart from the competition.me of 690 mW and a single-ended power consumption of 630 mW, this device offers clear advantages over other flagship models in its class. These unique features set it apart from the competition.Luxurious titanium alloy housing with excellent workmanshipThe housing of the DC-Elite is made of space-grade titanium alloy, which, together with tempered glass on the top and bottom, provides an unparalleled sense of elegance. Titanium has the best strength-to-weight ratio of any metal, is lighter than stainless steel and stronger than aluminum alloys.4.4 mm balanced output, 3.5 mm unbalanced output + 3.5 mm coaxial outputDC-Elite has a balanced 4.4 mm output and an unbalanced 3.5 mm output that can be used for both balanced headphones and unbalanced headphones. The 3.5 mm interface is compatible with the SPDIF coaxial output and supports the transfer of the digital output to an external DAC. A long press on the PCM volume reduction button converts the 3.5 mm connector into the coaxial output. At the same time, the display changes to white color. LED displayFour colors indicate four states of the DC-Elite Standby, DSD, PCM, coaxial output With a great UAC Companion APPPractical functions are already available. The iBasso UAC APP has been fully upgraded to work with the DC-Elite and offers the following:4 levels of PCM volume reduction2 digital filter options 20 levels of L/R balanceVGP2024 Portable Audio Grand Award: WinnerIn the Japanese VGP2024 selection, the DC-Elite not only won the Gold Award for the Portable Amplifier and DAC category, but also the only Portable Audio Grand Award out of thousands of portable audio devices evaluated. This is the first time that a Chinese hi-fi product has won the VGP Portable Audio Grand Award.NotesThe DC-Elite works plug-and-play with iPhones, Android smartphones and tablets with Android 5.1 and higher without the need to install third-party drivers or APPs (due to system or hardware limitations of the Android device, some smartphones or tablets may experience compatibility issues). On some Android devices, it may be necessary to activate the OTG function manually in the system settings. To get more settings, we strongly recommend you to install the iBasso UAC APP if you are using Android devices. The DC-Elite is plug-and-play on Mac, Win10 and Win11 computers. For WinXP, Win7 and Win8 systems, please download the driver from the manufacturer's website. After proper installation, the DC-Elite can be used as a USB sound card. The DC-Elite does not have a built-in battery and is therefore powered by the master device via the USB interface. The actual power consumption depends on the operation and the device system. Since the DC-Elite has a flagship DAC chip with current output, it is normal for the DC-Elite to get warm during operation.Scope of deliveryDC-Elite, USB-C cable, C-to-Lightning cable, USB-C-to-USB-A converter, leather case and user manual.Specifications:4.4mm balanced:Output voltage：4.6Vrms Output power：280mW@32ohm, 70mW@300ohm THD+N：0.00022%（300ohm load） 0,00031%（32-Ohm-Last） Frequency response：10Hz~50kHz -0.5dB S/N：121dBA Dynamic range：118dBA Noise floor: 3.5μVrms (Normal listening volume: <0.9μV） Output impedance: < 0.4ohm 3.5mmSingle-ended:Output voltage：2.28Vrms Output power：162mW@32ohm THD+N：0.00028%（300ohm load） 0,00056%（32-Ohm-Last） Frequency response：10Hz~50kHz -0.5dB S/N：117dBA Dynamic range：115dBA Noise floor: 2.4μVrms (normal listening volume: <0.8μV) Output impedance: <0.2ohmDAC chipset: ROHM BD34301EKVPCM：up to 32bit/768kHzDSD：Native DSD64、DSD128、DSD256、DSD512Weight: 60.5gSize: 64mmX35mmX14.5mm

iBasso DC07PRO Hochauflösender USB-DAC/AMPErstklassige KlangqualitätTop-Messungen Niedriger StromverbrauchHohe AusgangsleistungBequeme BedienungHochwertige BauteileEin Meisterwerk Dongle Der iBass DC07PRO ist ein Dongle, der die umfangreiche Erfahrung von iBasso in der Dongle-Entwicklung mit Designelementen ihrer Audio-Player kombiniert. Er nutzt fortschrittliche Technologien, um einen Dongle mit außergewöhnlich niedrigem THD+N zu schaffen. Der DC07PRO hat in der Tat erhebliche Fortschritte bei seinen Messwerten gemacht, einschließlich Dynamikbereich und Ausgangsleistung. Top-Messungen THD+N：0.000098%（-120.2dB）DNR：134dB Grundrauschen：760nV Ausgangsleistung：430mW+430mW@32Ω Frequenzgang：10Hz-80kHz（-0.5dB） FPGA DC07PROs Systemsteuerung Der DC07PRO nutzt die von iBasso selbst entwickelte FPGA-Technologie, die die Audioalgorithmen integriert und den Systemcontroller des Dongles bildet. Als Herzstück des DC07PRO spielt der FPGA die Rolle der Signalregeneration und der Taktsynchronisation. Der FPGA generiert außerdem einen extrem jitterarmen Takt für den DAC und den USB-Empfänger, wodurch der durch den USB-Bus verursachte Takt-Jitter effektiv reduziert werden kann. CS43131 x4 Flaggschiff-DAC-Array Der DC07PRO verwendet vier Cirrus Logic Flaggschiff-DAC-Chips CS43131 in Kombination mit unserer exklusiven FPGA-Technologie und erfahrenem Schaltungsdesign; das Ergebnis ist ein umfassender Sprung bei den Audiomessungen. Der von AP gemessene THD+N liegt bei bemerkenswerten -120,2dB! Durch die Verwendung unseres exklusiven FPGAs unterstützt der DC07PRO DSD512 und PCM 32bit/768kHz. Dies ist eine weitere Weiterentwicklung des CS43131×4 DAC-Arrays. Beeindruckende Leistungseffizienz Niedriger Stromverbrauch, enorme Leistung Der DC07PRO verwendet einen synchronen DC-DC-Wandler mit einem Wirkungsgrad von bis zu 94 %. Der Stromverbrauch des DC07PRO beträgt nur 80 mA, was 40% weniger ist als der des DC04PRO, und die Ausgangsleistung ist um 82% erhöht! Das DAC-Netzteil verwendet einen extrem rauscharmen LDO für analoge Schaltungen mit einem PSRR (Power Supply Rejection Ratio) von bis zu 100dB, um die Reinheit des Netzteils zu gewährleisten. 0,96-Zoll-OLED Bequeme und intuitive Bedienung Der DC07PRO hat einen 0,96-Zoll-OLED-Bildschirm und ist mit einem ALPS-Encoder ausgestattet. Mit dem Multifunktionsknopf können Sie alle Einstellungen durchsuchen und vornehmen. Drehen und drücken Sie einfach den Multifunktionsknopf, um die Lautstärke zu regeln, digitale Filtereinstellungen vorzunehmen, usw. Der DC07PRO unterstützt auch die iBasso UAC Android APK, mit der Sie alle Einstellungen über Ihr Android-Gerät steuern können.Drücken Sie einfach den Knopf, um den OLED-Bildschirm ein- oder auszuschalten. Wenn der Bildschirm ausgeschaltet ist oder sich auf dem Startbildschirm befindet, drehen Sie den Knopf, um die Lautstärke einzustellen. Wenn der Bildschirm eingeschaltet ist, halten Sie den Knopf gedrückt, um das Einstellungsmenü aufzurufen. Drehen Sie den Knopf im Einstellungsmenü, um durch die Einstellungen zu blättern. Drücken Sie den Knopf, um die Einstellungen zu ändern. Die Einstellungen werden automatisch gespeichert. CNC-gefräst, Bildschirm, & Knopf Das Gehäuse des DC07PRO besteht aus CNC-gefrästem Aluminium, die Oberseite ist der OLED-Bildschirm, und die Rückseite ist aus gehärtetem Glas. Zusätzlich wurde ein Knopf strategisch an der Seite positioniert. Der Stil und die Präzision verströmen ein Gefühl von Luxus und Raffinesse, welches an High-End-DAPs erinnert. Die Strombegrenzung des iPhone ist kein Problem Das iPhone hat eine Stromausgangsbegrenzung für externe Geräte. Wenn der Stromverbrauch des Slave-Geräts hoch ist, kann es leicht den iPhone-Stromschutz auslösen, was zu einer Zwangsabschaltung führt. Der DC07PPRO hat einen Stromverbrauch von nur 80 mA, also kein Grund zur Sorge. Mit dem Multifunktionsknopf und dem OLED-Bildschirm lassen sich verschiedene Verstärkungen und Filter schnell einstellen. Auf der iOS-Seite ist keine APK erforderlich, und alle Funktionen des DC07PRO können verwendet und genutzt werden. 32bit/768kHz SPDIF-Ausgang Der DC07PRO unterstützt einen SPDIF-Ausgang mit bis zu 32bit/768kHz. Mit dem DC07PRO kann Ihr Smartphone nun auch ein SPDIF-Transportgerät der Spitzenklasse sein.

iBasso DX180 Digital audio player with Android 13 and outstanding quad DAC array New look + new user interface + removable rear panel Two NDK femtosecond oscillators 5,0-Zoll-1080P-Vollbildschirm Qualcomm Snapdragon 665 SoC Four flagship DAC chipsets: CS43131 × 4 FPGA master 2.0 NDK femtosecond oscillators CS43131 × 4 flagship DAC array The CS43131, a flagship DAC chip from Cirrus Logic, has an impressive dynamic range of 130dB and an incredibly low THD+N of -115 dB. The iBasso DX180 utilises the same DAC matrix technology as the DX260, with 4 pieces of CS43131 chips working together to exceed the theoretical technical limits of the CS43131. The THD+N measured by AP reaches an impressive -121dB, demonstrating the superior technology and design concept of the iBasso DX180 and outperforming the competition. FPGA-MASTER 2.0 - The extended audio system controller After years of algorithm development, iBasso's FPGA-Master has entered generation 2.0. As an audio system controller, it requests audio data directly from the SoC and plays an important role in signal playback and maintaining signal integrity. It synchronises and generates all audio clocks using two NDK femtosecond oscillators to provide a fully synchronised single clock source. The FPGA Master 2.0 also features precise picosecond control and adjusts the DAC clock and data and constructs the FIR filter.Leading algorithm to achieve FIR 2x output The FPGA Master 2.0 algorithm fully utilises the capabilities of the 4 pieces of CS43131 DAC chipsets. In total, the normal performance of the CS43131 is significantly increased, making the chipset a super performer. Synchronous parallel output mode This reduces the "discrete distortion" between the DACs and improves the overall performance. FIR 2x mode FPGA-MASTER 2.0 achieves precise control and adjustment of the DAC clock and data in the picosecond range, allowing each DAC data stream to be adjusted independently. Through the DACs' "Delay Parallel", the DACs form an analogue hardware FIR filter that averages the differences between multiple DACs, reducing distortion and effectively improving the sonic detail and quality of the bitstream. Amazingly true AP measurements The actual measurements of the predecessor DX170 are close to the theoretical limits of the CS43131 chipset. However, the DX180 has gone one step further, completely overcoming the hurdles and becoming an insurmountable leader in this price range. With a noise level of just 0.79μV - the background is as black as possible The iBasso DX180 is characterised by an impressively low noise floor of just 0.79 µV. Even at maximum volume and high gain, the noise floor of the balanced port is only 1.1μV. The noise floor is significantly lower than other players in this price range, making the DX180 extremely quiet. The black background ensures exceptionally vivid music playback. Qualcomm Snapdragon 665 SoC - Smooth operation in all scenarios The DX180 uses the Qualcomm Snapdragon 665 SoC, which has an 8-core architecture and an advanced 11nm process. This results in lower heat generation and improved stability for smooth operation. With micro SD card expansion, the DX180 can offer an impressive 2TB of additional storage space. No matter how much music you love, the DX180 can effortlessly hold it all. Android 13 System - "Non-SRC" The iBasso DX180 is equipped with the Android 13 system, which allows you to freely install streaming apps and enjoy the convenience of Android. The DX180 bypasses SRC at system level, whether it is the Mango Player or third-party streaming apps, you can use the "Non-SRC" function at system level and enjoy music in high resolution. Dedicated USB receiver for USB DAC mode Support for ASIO/WASAPI output Specifications The DX180 is compatible with PD3.0 and QC3.0 fast charging. DNR: 133dB THD+N：-121dB FIR 2× output Snapdragon 665 SoC 4G + 128GB PD3.0 or QC3.0 fast charging Dedicated USB receiver for USB DAC mode Coaxial output PCM 24bit/384kHz USB 3.1 high speed transfer Native DSD 512x, PCM 32bit/768kHz 4.4 mm BAL + 3.5 mm SE Sharp 5.0inch, 1080*1920 P, with capacitive on-cell touch panel Audio Format：APE, FLAC, WAV, WMA, AAC, ALAC, AIFF, OGG, MP3, DFF, DSF, DXD, and DST USB C：USB 3.1 Output connections：4.4 mm balanced jack output/ 3.5 mm jack output / 4.4 mm line out/ 3.5 mm line out/ 3.5 mm coaxial output/ USB OTG output WiFi：802.11b/g/n/ac（2.4Ghz/5Ghz） Bluetooth：V5.0 RAM+Memory： 4G+128G Battery：3200mAh 3.8V Li-Polymer battery Size：123mm*75mm*16mm Weight：206g 4.4mm balanced connection Maximum output level：4Vrms (low gain) 6Vrms(high gain) Output power： 690mW + 690mW@32ohm THD+N＜0.1% Frequency response：10Hz~75kHz -1dB S/N：133dB Dynamic range：133dB THD+N：-121dB (A-wt, 600ohm load) Crosstalk：-144dB Noise floor: < 1.1μV (high gain） Output impedance：1.1 Ohm 3.5 mm jack output Maximum output level：2Vrms (low gain) 3Vrms(high gain) Output power：281mW + 281mW@32ohm THD+N＜0.1% 525mW + 525mW@16ohm Frequency response：10Hz~75kHz -1dB S/N：127dB Dynamic range：127dB THD+N：-116dB(A-wt, 600ohm load) Crosstalk：-118dB Noise floor: < 1.1μV (high gain） Output impedance：0.6ohm 4.4mm balanced line output Maximum output level：4Vrms Frequency response：10Hz~75kHz -1dB S/N：133dB Dynamic range：133dB THD+N：-121dB Crosstalk：-130dB 3.5 mm single-sided line output Maximum output level：2Vrms Frequency response：10Hz~75kHz -1dB S/N：125dB Dynamic range：125dB Distortion+N：-112dB Crosstalk：-115dB

iBasso leather case for DX180 Upgrade and protect your DX180 with a genuine iBasso premium leather case Stylish green leather case for your iBasso DX180 Genuine iBasso product Protects your DAP with ornate decoration

iBAsso DX240 Case including three adapter plates for use with modules of other iBasso players

Portable High-Res Player Dual DAC design: 8 Cirrus Logic CS43198 DAC chips for exceptional audio performance and natural sound. High-Resolution Audio: Supports PCM 32 bit/768 kHz and DSD512 for superior sound quality. High output power: Up to 1015 mW at 32 Ω with a balanced 4.4 mm output that ensures powerful sound reproduction for high-impedance headphones. Bluetooth V5.0: Supports aptX, aptX HD and SBC for high quality wireless streaming. Portable design: Slim, lightweight aluminum housing with 5-inch IPS display for easy navigation. Battery life: Integrated 4400 mAh battery with up to 14 hours of playback time for long listening sessions. USB DAC mode: Use the DX260MK2 as a high-quality USB DAC with your computer or other devices for superior sound output. Android 13 & Mango OS: Dual system for flexible use, including Android for apps and Mango OS for dedicated audio playback. The iBasso DX260MK2 is a state-of-the-art portable lossless music player that takes the world of portable hi-fi audio devices to a new level of performance. Equipped with a flagship DAC matrix with eight Cirrus Logic CS43198 chips, the DX260MK2 delivers unparalleled sound quality and an enormous dynamic range. It supports high-resolution audio formats such as PCM 32-bit/768 kHz and DSD512, making it the perfect choice for audiophiles looking for exceptional sound reproduction. With a powerful Snapdragon 665 chipset, 4 GB LPDDR4X RAM and 128 GB UFS storage, the DX260MK2 ensures smooth and fast operation. The device has a high-quality aluminum housing and a 5-inch IPS display for an elegant and user-friendly interface. The DX260MK2 supports multiple output modes, including a balanced 4.4 mm headphone output and a 3.5 mm output, as well as USB DAC functionality. Improved internal memory: The iBasso DX260MK2 now has twice as much memory as the OG model. From 64 GB on the OG model to 128 GB on the MK2, the iBasso DX260 MK2 offers its users twice as much storage space. With twice the storage space, users can store twice as many songs as on the OG model. In addition, this new internal memory offers faster UFS technology. Newer Android operating system: The iBasso DX260MK2 is equipped with the newer Android 13 operating system. With the newer Android, the MK2 offers a smoother user interface and newer generation internal UFS storage. It is faster and more reliable than the previously used eMMC memory. With the newer Android, the newer iBasso DX260 MK2 offers a smoother user interface with improved application support. Advanced FPGA Master 2.0 configuration: The iBasso DX260 MK2 features the advanced FPGA Master 2.0 system controller. It provides full high-resolution audio signal processing on the device. From the data buffer, I/O interface, crystal oscillators and FIR filters to the eight DAC arrays and final output, everything is precisely calculated and controlled by this latest technology. It offers true high-resolution audio processing for various applications on the device. Flagship Octa-DAC setup: Like the OG model, the iBasso DX260 MK2 features a proven Octa-DAC setup. It is equipped with eight CS43198 flagship 32-bit DAC chips. This high-fidelity configuration ensures outstanding performance and provides clear, noise-free output with high SNR, DNR and extremely low THD+N. It supports 32-bit PCM and native DSD256 audio signals. Powerful output for easy operation of your IEMs: The iBasso DX260 MK2 has two headphone outputs (3.5 mm + 4.4 mm). It has a powerful amplifier that promises an output power of around 1015 mW per channel. With this powerful output, the iBasso DX260 MK2 can easily drive various IEMs and headphones.The iBasso DX260MK2 is the ultimate portable Hi-Fi music player for audiophiles who demand the best sound quality and advanced features. With its powerful R2R DAC, customizable output modes and support for high-resolution audio formats, it offers a unique and immersive listening experience that is perfect for music lovers on the go. Technical data Dimensions: 123 mm x 74.5 mm x 17.5 mm Weight: 229 g Display: 5.0 inch IPS, resolution 1080 x 1920 Audio formats: APE, FLAC, WAV, WMA, AAC, ALAC, AIFF, OGG, MP3, DFF, DSF, DXD, DST USB DAC support: PCM 768 kHz/32 bit, DSD512 Bluetooth version: V5.0 aptX, aptX HD, SBC WLAN: 802.11b/g/n/ac (2.4 GHz/5 GHz) Memory: 4 GB LPDDR4X RAM, 128 GB UFS ROM, expandable with MicroSD (TF) card slot Battery: 4400 mAh, 3.8 V, Lithium-Polymer battery Charging time: approx. 2.5 hours Playback time: approx. 14 hours (depending on use) Audio output specifications 4.4 mm headphone output (balanced): Output power: 1015 mW + 1015 mW at 32 Ω Frequency response: 10 Hz - 75 kHz -1 dB SNR: 133 dB Dynamic range: 134 dB THD+N: -121 dB (A-weighted, 600 Ω load) Separation: 145 dB Output impedance: 0.6 Ω 3.5 mm headphone output: Output power: 480 mW at 32 Ω THD+N: 0.03 Separation: 67 dB at 32 Ω SNR: 116 dB Noise: <930 nV (low gain) What`s in the box1 x iBasso DX260MK2 Lossless Hi-Fi music player 1 x USB Type-C data cable 1 x coaxial cable 1 x burn-in cable 1 x TPU protective cover 1 x screen protector 1 x warranty card 1 x quick start guide

R2R Digital Audio Player Manufactured with 344 high-precision resistors 8-channel R2R, fully differential design 20-bit R2R + 4-bit string DAC Hardware resistance compensation network Completely eliminates zero-crossing distortion and offers excellent linearity performance 130 dB dynamic range, THD+N: -97 dB FPGA Master 3.0 inside, supports NOS mode and four self-developed digital filters Two ultra-low-noise Accusilicon femtosecond oscillators Supports 12V DC input power Qualcomm Snapdragon 665 SoC 4GB RAM + 128GB ROM The ultimate evolution of R2R decoding – R2R Ultra The DX270 is not a typical R2R player, but a profound redesign of R2R decoding by iBasso to implement R2R. It features a hybrid architecture of 20-bit R2R + 4-bit string DAC, combined with an 8-channel full-differential discrete R2R, FPGA Master 3.0, internally developed algorithms, and a hardware resistance compensation network. This results in a dynamic range of 130 dB and a THD+N of better than -97 dB, completely overcoming the zero-point distortion issues common in R2R devices and achieving near-perfect linearity. iBasso refers to this entire technical system as R2R Ultra. 8-channel, fully differential R2R The DX270 uses a fully symmetrical architecture design with L+, L-, R+, and R-, each containing two R2R DACs internally and forming an “8-channel R2R” configuration. This differential design with two DACs is the key to solving the problem of “zero-crossing distortion” – when audio signals change between positive and negative voltages at zero, conventional single-channel decoding can cause signal interruptions. The differential output of the dual DACs compensates for these gaps, enabling smoother transitions. Even with small signals, linearity remains stable. This not only solves zero-crossing distortion, but also expands the dynamic range of R2R decoding to an industry-leading 130 dB, bringing out the full dynamic range of the music. 20-bit R2R + 4-bit string DAC Leading technology for superior sound quality The DX270 uses a hybrid architecture of 20-bit R2R + 4-bit string DAC. For high-bit processing (MSB), a string DAC is used, which directly approximates the target voltage through series resistors and switches. It offers a wide dynamic range, low noise energy, and excellent THD+N. The disadvantage is the need for more resistors. iBasso invest heavily, a total of 344 high-precision resistors, which is almost double the number of resistors compared to standard R2R DACs and results in a finer, more natural, and purer sound. FPGA Master 3.0 Inside Proprietary algorithm for audio evolution The DX270 features FPGA Master 3.0, which is based on iBasso's years of algorithm development and has 7.5 times more logic LUTs than version 2.0. As the main audio controller, it retrieves data directly from the SoC, using synchronized system clock generators with two extremely low-noise Accusilicon femtosecond oscillators. The FPGA Master 3.0 also acts as a “hardware calibration master.” It can detect and compensate for parameter errors in real time, reducing the nonlinear characteristics of the components and improving the precision of the hardware resistance compensation network. The synergy of algorithms and hardware further optimizes the THD+N and dynamic range of the DX270, resulting in more stable decoding performance. Thanks to our algorithm, the DX270 also supports NOS mode and four types of digital filters for a different listening experience. Hardware resistance compensation network Further pushing the limits of performance Combined with FPGA algorithms and a hardware resistance compensation network that uses 76 highly precise resistors, decoding accuracy is significantly improved, dynamic range is expanded, and distortion is reduced. This deep synergy between “software + hardware” enables the R2R Ultra DAC to break through traditional performance limits. The accuracy of the equivalent resistance reaches 1.4 parts in 100,000. Thorough solution to the problem of zero-crossing distortion Confirmed by both measurement and listeningZero-crossing distortion at signal levels close to zero leads to loss of detail, abnormal noise, or lack of clarity in the low frequencies. This is a common problem with conventional R2R DACs. The DX270 uses a fully differential architecture and precise calibration to achieve an extremely low zero-crossing distortion level of -120 dB, clearly reproducing even subtle instrumental harmonies and vocal nuances.Excellent linearity Quieter background, excellent airiness The complex waveforms of music consist of many frequency components. If the output curve of the DAC is not perfectly linear, additional harmonic distortion, intermodulation, and waveform distortion occur. Linearity directly affects decoding accuracy. With its extremely high resistance matching, reliable switching precision, and optimized circuit architecture, the DX270 surpasses the linearity of conventional R2R DACs. The output curve is close to the ideal curve, free of additional harmonics or distortion, providing a “night-black” background for natural and realistic music reproduction. Qualcomm Snapdragon 665 SoC 4 GB RAM + 128 GB ROM, 5.5-inch screen Equipped with Qualcomm Snapdragon 665 SoC, 4 GB RAM, and 128 GB UFS 2.1 high-speed storage, ensuring smooth operation and fast response. The DX270 supports expansion up to 2 TB micro SD card for enormous storage space. The 5.5-inch display with a resolution of 1080*2160 offers rich colors and a precise touch experience, which increases user-friendliness. Supports 12V DC input powerPowerful and dynamic performance Connecting to a 12V DC power supply increases the amplifier's power supply from ±8V to ±12V, activating “Super Gain Mode” with an output power of up to 1575mW + 1575mW at 32Ω. This ample power can easily handle complex music genres and various types of headphones. Two analog JRC volume chipsets Ensures pure sound with noise reduction The DX270 uses two dual-channel analog JRC volume ICs that form a 4-channel volume control. At low volumes, this volume control synchronously attenuates noise. At typical listening volume (50 mV), it achieves over 91 dB SINAD, ensuring clear and natural sound. Non-SRC-based Android 13 and Linux-based Mango OS The DX270 uses the Android 13 operating system with an optimized user interface that supports the installation of various streaming apps. It bypasses SRC at the system level so that apps such as Mango Player can function optimally. In addition, it features Mango OS, a Linux-based music system with many advanced algorithms designed specifically for audio playback. With lower SoC load, no WiFi interference, no Bluetooth interference, and lower EMI, the result is a purer sound. 4.4 mm PO + 4.4 mm LO + 3.5 mm PO Low-latency USB DAC With 3.5 mm and 4.4 mm output interfaces, it is effortlessly suitable for balanced and unbalanced headphones and IEMs. The balanced 4.4 mm line output provides convenient external amplification. The coaxial 3.5 mm output supports high-quality digital output up to 384 kHz. Thanks to USB DAC support, the DX270 can become a high-end R2R USB DAC for PCs or smartphones.

Flagship DAP Qualcomm Snapdragon 665 SoC Discrete components: 16 groups of 8E PWM DAC Self-developed FPGA master 3. 0 technology Patented dual-battery architecture, digital headphone amplifier with separate power supply The headphone amplifier supports 12V external power supply Non-SRC Android 13 open system Mango OS Linux closed pure tone system 8G RAM + 256G ROM 2150mW + 2150mW@32 Ω high thrust Two Accusilicon femtosecond crystal oscillators 316 stainless steel housing THD+N -119dB Multi-order harmonic matching function Replaceable headphone amplifier card 6, 0-inch AMOLED screen (1080P) The new iBasso DX340 is here! It continues the dual-control dual-electric concept of the DX300 series. Equipped with the industry-leading in-house developed PWM DAC with discrete components and the in-house developed FPGA Master 3.0 technology, it achieves a THD+N value of -119dB at the level of the flagship discrete desktop decoder, taking the DX340 to a new level among portable players with discrete components. FPGA Master3.0 as the core Driving 128 PWM DACs Decoding the discrete components of a flagship desktop for a portable player When the FPGA generates a PWM signal for decoding, the discrete DAC decodes the signal. The DX340 utilises an industry-leading 16-group 8E PWM DAC cascade. L+, L-, R+, R- each 32E per channel. The number of PWM DACs is more than 6.4 times that of other portable discrete DACs. With the advantage of decoding quantity and precise FPGA Master3.0 picosecond control, the noise rejection of the DX340 far exceeds that of other discrete DAC devices, and the THD+N of the entire device is as low as -119dB! FPGA Master 3.0+ Dual Accusilicon Femtosecond Crystal Oscillator Independent audio master control to create the second brain of the player The DX340 is equipped with FPGA Master 3.0 technology based on iBasso's self-developed algorithms accumulated over many years. The number of LUT logic units in the FPGA chip is 7.5 times that of FPGA-Master 2.0. FPGA-Master3.0 is equipped with a new and exclusive harmonic adjustment algorithm based on FPGA-Master2.0, which enables true ‘self-optimisation of harmonics’. FPGA-Master 3.0 can be used as an audio master to request audio data directly from the SoC, and with two Accusilicon femtosecond crystal oscillators with a noise of only -158dBc/Hz@1kHz, it can achieve a fully synchronous single clock source, achieve picosecond precision control, reduce jitter as much as possible, and build a pure digital audio system. Every note is precise, clear and detailed. FPGA-Master 3.0 utilises the power of the new FPGA and adds a large number of new harmonic tuning algorithms, allowing the user to freely adjust even and odd harmonics. The result is richer harmonics and a more pronounced sound. By adding even harmonics, the sound can achieve a flavour similar to that of the bile duct, and by adding odd harmonics, the sound can become more passionate and energetic. Patented dual-battery power supply architecture Constantly evolving discrete power supply design The power supply system is the part that affects the core of the player's sound quality. Excellent players have strict requirements for the power supply of SOC, DAC, headphone amplifier, etc. If a single battery is supplied with power and the load is large, it is easy to cause interaction between the digital circuit and the analogue circuit, resulting in additional distortion and thus degradation of sound quality. The DX340 is powered by iBasso's patented dual-battery architecture, where the digital and analogue sections are powered by a separate battery. The independent power supply can ensure the stability of the power supply of the headphone amplifier and effectively isolate the electromagnetic interference of the digital part, greatly reducing the degradation of sound quality caused by insufficient power supply. At the same time, we have further optimised the dual electrical architecture of the DX340, unified the power management, charging and power display, and used a single icon display. When connected to a fast charging socket with sufficient power, the DX340 is powered by an internal battery and is completely independent of the power supply. The ever-evolving dual electric architecture is, of course, invincible. China utility model patent Patent No.: ZL202020682917.5 Interchangeable headphone amplifier, standard AMP15 BUF643a × 8 for driving power Supports external DC 12V independent power supply The DX340 is designed with interchangeable amplifier cards and is compatible with multiple amplifier cards, such as AMP1X series, AMP12, AMP13, AMP14, etc., and will also be compatible with other AMP1X series amplifier cards that will be released in the future. Each amplifier card is unique and there is no difference in positioning. They have irreplaceable advantages to fulfil different requirements. The standard AMP15 headphone amplifier has a new architecture and supports an external DC-12V power supply. After connecting to the DC-12V power supply, the power supply of the headphone amplifier is increased from the standard ±8V to ±12V and the ‘S-level gain mode’ is switched on with a boost of up to 2150mW+2150mW@32 Ω. The large boost ensures that an excellent sense of hierarchy and resolution is achieved with both complex classical music on a grand scale and relatively simple pop music and ACG, so that every detail is meticulously brought out. *AMP15 is only supported by the DX340. 8G RAM+256G ROM The flagship must have a belly to hold it all The DX340 is equipped with a Qualcomm Snapdragon 665 processor, 8GB RAM and 256GB ROM. Compared to some ‘flagships’ that only come with 4GB+64GB of memory, the doubled memory offers a smoother system experience. UFS2.1 high-speed memory with large capacity, the installation of extensive software is also easily possible. In addition, the DX340 supports TF card expansion up to 2TB, so you don't have to worry about storage space. Non-SRC Android13 + Linux closed pure tone system Open/closed dual system, full control of operation/sound quality DX340 is equipped with Android 13 system, with a beautiful UI and more intuitive operation. Support the installation of various streaming media, cloud music APKs, the openness of the Android system is under control, and you can enjoy the thrill of a roller coaster. The DX340 bypasses SRC globally at the system level, so both Mango players and streaming APKs can enjoy the ‘non-SRC’ function at the system level. The DX340 also features Mango OS, a pure sound system based on a closed Linux specifically designed for music playback. Mango OS has accumulated a large number of optimisation results for music decoding and the underlying driver algorithms etc., and the CPU load is lower as it only focuses on audio playback. The pure sound system has no WiFi and Bluetooth interference, less EMI and a purer listening experience. Dual system without switching, one player, two experiences: Android and pure sound! 6.0-inch AMOLED full screen (1080*2160) The colours are rich and the contrast is high, which is eye-catching and energy-efficient The DX340 uses a 6.0-inch AMOLED full screen with 1080*2160 pixels, which provides a narrow front bezel and unparalleled visual impact. The pixels of the AMOLED screen shine individually, with deep blacks and a million times higher contrast ratio. AMOLED screens are more energy efficient than LED screens and the colours are rich and full, which is pleasing to the eye. 316 luxury stainless steel body Can compete with any flagship The body of the DX340 is made of 316 stainless steel, which has higher corrosion resistance and hardness than 304 stainless steel. Compared to the aluminium alloy housing, the stainless steel housing is stronger and has better acoustic performance. The DX340 is CNC injection moulded, the surface is polished and drawn, and the unique metallic sheen of the steel gives the product a luxurious texture that the aluminium alloy enclosure cannot provide. The rear case is detachable Equipped with a professional USB bridge chip Comparable to HiFi equipment The DX340 is equipped with a professional USB bridge chip, and the USB DAC mode supports PCM 32bit/768K+Native DSD512 hardware decoding. Ultra-low latency, almost imperceptible, watch movies, play games, and also have a flagship-level experience.

DX340 AMP Card Faceplate Dual 3.5mm This DX340 faceplate is compatible with the AMP13

DX340 AMP Card Faceplate Dual 4.4mm This DX340 faceplate is for AMP12 and AMP14. When using AMP12 with the DX340, the line out works normally. However, the background noise is high when using phone out. Please be aware of this before purchasing. The AMP14 module works normally with the DX340.

iBasso DX340 TI - Titanium Version, limited to 300 units worldwide Flagship DAP CNC-milled titanium housing Newly modified, replaceable headphone amplifier card AMP15 Qualcomm Snapdragon 665 SoC Discrete components: 16 groups of 8E PWM DAC Self-developed FPGA Master 3.0 technology Patented dual-battery architecture, digital headphone amplifier with separate power supply The headphone amplifier supports 12V external power supply Non-SRC Android 13 open system Mango OS Linux closed Reinton system 8G RAM + 256G ROM 2150mW + 2150mW@32 Ω output power Two Accusilicon femtosecond quartz oscillators Multi-order harmonic adjustment function 6.0-inch AMOLED screen (1080P) The new iBasso DX340Ti is here! It continues the dual-control, dual-electric concept of the DX300 series. Equipped with the industry-leading, self-developed PWM DAC with discrete components and the self-developed FPGA Master 3.0 technology, it achieves a THD+N value of -119dB, on par with the flagship among discrete desktop decoders, taking the DX340 to a new level among portable players with discrete components. FPGA Master 3.0 as the core Control of 128 PWM DACs Decoding the discrete components of a flagship desktop for a portable player When the FPGA generates a PWM signal for decoding, the discrete DAC decodes the signal. The DX340 uses an industry-leading 16-group 8E PWM DAC cascade. L+, L-, R+, R- 32E each per channel. The number of PWM DACs is more than 6.4 times higher than other portable discrete DACs. With the advantage of decoding quantity and precise FPGA Master3.0 picosecond control, the DX340's noise reduction far exceeds that of other discrete DAC devices, and the THD+N of the entire device is as low as -119dB! FPGA Master 3.0+ Dual Accusilicon Femtosecond Quartz Oscillator Independent Audio Master Control to Create the Player's Second Brain The DX340 is equipped with FPGA Master 3.0 technology, which is based on iBasso's self-developed algorithms collected over many years. The number of LUT logic units in the FPGA chip is 7.5 times higher than in FPGA Master 2.0. FPGA Master 3.0 is equipped with a new and exclusive algorithm for adjusting harmonics based on FPGA Master 2.0, which enables true “self-optimization of harmonics.” FPGA Master 3.0 can be used as an audio master to request audio data directly from the SoC, and with two Accusilicon femtosecond quartz oscillators with a noise level of only -158dBc/Hz@1kHz, it can achieve a fully synchronous single clock source, achieve precise control in the picosecond range, reduce jitter as much as possible, and build a purely digital audio system. Every note becomes precise, clear, and detailed. FPGA Master 3.0 leverages the power of the new FPGA and adds a large number of new algorithms for harmonic tuning, allowing users to freely adjust even and odd harmonics. The result is rich harmonics and a more distinctive sound. By adding even harmonics, the sound can achieve a flavor similar to that of the bile duct, and by adding odd harmonics, the sound can become more passionate and energetic. Patented dual-battery power supply architecture Continuously evolved discrete power supply design The power supply system is the part that affects the core of the player's sound quality. Excellent players have strict requirements for the power supply of SOC, DAC, headphone amplifier, etc. When a single battery is used to supply power and the load is large, it is easy for the digital circuit and analog circuit to interact, resulting in additional distortion and thus a deterioration in sound quality. The DX340 is powered by iBasso's patented dual-battery architecture, in which the digital and analog sections are powered by separate batteries. The independent power supply can ensure the stability of the headphone amplifier's power supply and effectively isolate the electromagnetic interference of the digital part, significantly reducing the deterioration in sound quality caused by an insufficient power supply. At the same time, we have further optimized the dual electrical architecture of the DX340, unified power management, charging, and power display, and used a single icon display. When the DX340 is connected to a fast-charging outlet with sufficient power, it is powered by an internal battery and is completely independent of the power supply. The ever-evolving dual electrical architecture is, of course, unbeatable. China Utility Model Patent Patent No.: ZL202020682917. 5 Interchangeable headphone amplifiers The DX340Ti comes with a modified AMP15 module as standard Supports external DC 12V independent power supply The DX340 was designed with interchangeable amplifier cards and is compatible with multiple amplifier cards, such as the AMP1X series, AMP12, AMP13, AMP14, etc., and will also be compatible with other AMP1X series amplifier cards that will be released in the future. Each amplifier card is unique, and there is no difference in positioning. They have irreplaceable advantages to meet different requirements. The standard AMP15 headphone amplifier has a new architecture and supports an external DC 12V power supply. After connecting to the DC 12V power supply, the headphone amplifier's power supply is increased from the standard ±8V to ±12V, and the “S-level gain mode” is activated with a boost of up to 2150mW+2150mW@32 Ω. The high thrust ensures that both complex classical music on a grand scale and relatively simple pop music and ACG produce an excellent sense of hierarchy and resolution, so that every detail is meticulously rendered. *AMP15 is only supported by DX340. 8G RAM+256G ROM The flagship must have a case that can accommodate everything The DX340 is equipped with a Qualcomm Snapdragon 665 processor, 8 GB RAM, and 256 GB ROM. Compared to some “flagships” that only come with 4 GB+64 GB of memory, the doubled memory provides a smoother system experience. UFS2.1 high-speed memory with large capacity, installing large software is also no problem. In addition, the DX340 supports TF card expansion up to 2 TB, so you don't have to worry about storage space. Non-SRC Android 13 + Linux closed pure tone system Open/closed dual system, full control over operation/sound quality The DX340 is equipped with the Android 13 system, with a beautiful UI and more intuitive operation. Support the installation of various streaming media, cloud music APKs, the openness of the Android system is under control, and you can enjoy the thrill of a roller coaster. The DX340 bypasses SRC globally at the system level, so both Mango players and streaming APKs can enjoy the “non-SRC” function at the system level. The DX340 also features Mango OS, a pure sound system based on a closed Linux and designed specifically for music playback. Mango OS has accumulated a large number of optimization results for music decoding and underlying driver algorithms, etc., and the CPU load is lower as it focuses only on audio playback. The pure sound system has no WiFi and Bluetooth interference, less EMI, and a purer listening experience. Dual system without switching, one player, two experiences: Android and pure sound! 6.0-inch AMOLED full screen (1080*2160) The colors are rich and the contrast is high, which is striking and energy efficient. The DX340 uses a 6.0-inch AMOLED full screen with 1080*2160 pixels, which offers a narrow front bezel and an unparalleled visual impression. The pixels on the AMOLED screen emit light individually, with deep blacks and a million-to-one contrast ratio. AMOLED screens are more energy-efficient than LED screens, and the colors are rich and full, which is pleasing to the eye. Titanium housing The DX340's housing is made of CNC-machined titanium, which has even higher corrosion resistance and hardness than 316 stainless steel. Compared to aluminum alloy housing, titanium housing is more stable and has better acoustic performance. The DX340 is manufactured using a CNC-controlled process, the surface is polished and engraved, and the titanium gives the product a luxurious texture that an aluminum alloy housing cannot offer. The rear case is removable. Equipped with a professional USB bridge chip Comparable to hi-fi equipmentThe DX340 is equipped with a professional USB bridge chip, and the USB DAC mode supports PCM 32bit/768K+Native DSD512 hardware decoding. Ultra-low latency, almost imperceptible, watch movies, play games, and enjoy a flagship-level experience.

iBasso's flagship in-ear headphones with 20 drivers Driver configuration: 8x Sonion EST + 10x Sonion BA + 2x Knowles BA 5-way crossover Hypoallergenic medical-grade plastic housing 5N monocrystalline copper cable with interchangeable connector system 3.5 mm, 4.4 mm + USB-C The epitome of music and art With a first-class combination of 20 drivers and a 5-way crossover, the Epitome perfectly combines the ethereal quality of electrostatic drivers with the precision of balanced armature drivers. The sound is beautiful and natural, offering you a realistic sound image. The hypoallergenic resin shell is artfully designed with a metallic finish that seems to glide across the surface, reminiscent of a starry night sky. As light and shadow change, the surface emits an iridescent, star-like glow that complements the listening experience. 20-driver configuration The Epitome was developed with a concept of 8 electrostatic and 12 balanced armature drivers for each monitor. The 8 electrostatic drivers preserve a natural, airy feel with a quality that only electrostatic drivers can provide. The 12 balanced armature drivers precisely cover the ultra-high, mid, and low frequency ranges. Together, the 20 drivers form an outstanding acoustic architecture that harmoniously combines electrostatic and balanced armature technology. Epitome uses through-hole resistors and other high-quality components to build a complex five-way crossover system that ensures that audio signals from different frequency bands are transmitted accurately. Transfers between individual frequency bands are smooth, resulting in seamless and consistent sound. Whether reproducing the complex layers of classical music or the subtle emotional nuances of vocals, the result is a precise and natural sound field. 8 electrostatic +12 balanced armature drivers from Sonion and Knowles Four dual electrostatic drivers from Sonion, responsible for the frequency range from 10 kHz to 20 kHz and above, enhance auditory perception by adding airiness and spatial openness to the sound image. A Knowles dual-frequency BA driver, responsible for the frequency range from 6 kHz to 12 kHz, provides the transition between high and ultra-high frequencies and ensures a natural crossover of the ultra-high frequencies. Two Sonion dual BA drivers for the mid to high frequency range, responsible for the range from 3 kHz to 6 kHz, provide the transition between high and mid frequencies, ensuring clear and powerful instrument separation and reproduction. Two Sonion dual midrange drivers for the 400 Hz to 3 kHz range provide a rich and emotionally expressive midrange. A Sonion dual woofer for the 20 Hz to 400 Hz range provides dynamic and controlled bass. Sparkling with a flowing brilliance like countless stars Epitome features 3D-printed housings with a three-dimensional look on the top that are still comfortable to wear. To live up to the Epitome concept, iBasso uses a unique technology that evenly integrates countless ultra-fine, shimmering metal parts that glide like the vast night sky. Under different lighting angles, the housing displays a flickering gradient effect that looks like meteors darting across the sky, dazzling and mesmerizing. Detachable copper cable with interchangeable connector system 3.5 mm SE, 4.4 mm BAL, and USB-C Epitome uses 0.78-2-pin earphone connectors that are compatible with all cables of the same interface. It comes with a 5N mono-crystal copper litz cable and features an interchangeable plug system. Standard connectors include 4.4 mm, 3.5 mm, and USB-C, providing ideal sound whether single-ended, balanced, or connected directly to a smartphone. New alloy cable Prior to the launch of Epitome, a new alloy was developed consisting of a special silver-plated wire that offers excellent sound quality. As it has not yet been fully tested for durability, iBasso has decided to offer it as a free gift along with the standard cable. (This is not a warranty part.) Specifications Drivers: 8x EST drivers + 12x BA drivers Cable: 0.78 2-pole 5N monocrystalline copper stranded structure Cable length: 120 cm Connectors: 4.4 mm BAL, 3.5 mm SE + USB-C Frequency response: 20 Hz–20 kHz Impedance: 17 ohms Sensitivity: 113 dB SPL/mW Weight per side: 6.2 g What`s in the boxiBasso Epitome IEMs Round metal box Yellow box with magnetic closure Standard cable New alloy cable 4.4 mm + 3.5 mm + USB-C plug Six types of ear tips Warranty card

Portable USB DAC/AMP Two CS43131 flagship DACs 580 mW + 580 mW at 32 Ω, fully balanced amplifier, extremely low noise level Femtosecond crystal oscillators PCM32bit/384kHz, Native DSD256 0.96-inch OLED screen Button control Android APK and parametric 8-band EQ Microphone support 4.4 mm + 3.5 mm dual outputs Silver-plated mono crystal copper USB-C to C cable UAC1.0+UAC2.0 dual protocols High-quality sound card for smartphones - Macchiato Improved sound quality compared to TWS Are you used to the convenience of wireless devices but tired of compromising on sound? Even the best TWS headphones can't deliver the clear vocals, powerful bass, and vibrant live atmosphere you want. Finally, iBasso has a better solution! Smartphone Hi-Fi sound card – Macchiato, plug-and-play, offers amazing sound quality with your wired IEMs. With Macchiato, you can enjoy and build your portable Hi-Fi system. Whether you're listening to music, watching movies, or playing games together, Macchiato offers rich detail and extremely low latency that TWS cannot achieve. If the sound of TWS is comparable to the grainy 720P screen of ten years ago, then Macchiato is a leap into 4K quality for your ears! Fully symmetrical amplifier for outstanding drive power Unleash the full potential of your earbuds with Macchiato's four-channel, fully symmetrical amplifier, delivering 580 mW + 580 mW at 32 Ω, so powerful that it breaks through traditional size limitations. Enjoy extremely low noise levels in the nanovolt range for pure, noise-free sound. With its exceptional energy efficiency, it effortlessly overcomes the power limitations of the iPhone and delivers long-lasting, high-quality sound from your favorite devices- anytime, anywhere. Microphone support for phone calls and gaming The Macchiato is not only a device for listening to music, but is also ideal for phone calls and gaming. The 3.5 mm interface supports HD microphone calls, enabling seamless communication. In FPS games, teammates can accurately report the positions of opponents, enabling quick tactical decisions. In MOBA games, tactical communication with teammates is lag-free, ensuring timely instructions. With the Macchiato, you can enjoy music and make calls without compromise. UAC1.0/2.0 dual protocols Compatible with smartphones, computers, and game consoles Macchiato is the Swiss Army knife of dongles-the UAC2.0 and UAC1.0 protocols can be switched at will, ensuring broad compatibility across multiple device platforms. The 3.5 mm interface also supports SPDIF output. UAC2.0 mode: Connects seamlessly with iOS, Android, and other mobile devices, as well as Windows, Mac OS, and Linux computers. UAC1.0 mode: Instantly transforms into an external sound card for game consoles such as Switch 2 and PS5. Game soundtracks have never been so clear and immersive, allowing you to enjoy the fun of gaming. SPDIF mode: Achieves 32-bit/384 kHz digital signal transmission. Turns your smartphone into a professional digital transport. Outstanding visual and acoustic experience This is the long-awaited Macchiato When looks and sound quality come together, the result is the “Macchiato,” designed for young people. The Macchiato continues the high aesthetic design genes of the iBasso Jr. series and is available in three colors: pink, blue, and black. It features a finely crafted aluminum CNC case that feels great. Enjoy not only great sound quality but also high aesthetics while listening to music! OLED screen and physical buttons for intuitive and seamless control Experience effortless control with the Macchiato's 0.96-inch OLED screen combined with intuitive physical buttons. Easily adjust volume, digital filters, gain, and channel balance at the touch of a button, perfect for quick adjustments and a fast, seamless user experience. Exquisite interface and user-friendly APK Includes the brand new 8-band PEQ Discover unlimited audio customization possibilities with the Macchiato's dedicated Android APK, which gives you full control over all functions. Powered by high-quality audiophile-grade DSP chips, the Macchiato features an 8-band parametric EQ. With the advanced iBasso UAC APK, you can precisely fine-tune your sound with the 8-band PEQ. Whether you want crystal-clear clarity, deep bass, or a personalized sound, Macchiato lets you effortlessly craft your desired listening experience. 100-step volume control 5 digital filter options 3 gain settings 20-step L/R balance 3 dynamic range enhancement options 8-band parametric EQ Two CS43131 flagship DAC chipsets + fs oscillators Outstanding specifications meet superior tuning Experience unparalleled sound clarity with Macchiato's two CS43131 flagship DACs, which offer exceptional tuning and sound precision. Equipped with advanced femtosecond oscillators, it reshapes digital timing to minimize jitter and distortion, ensuring that every note is crystal clear. Whether it's the subtle vocals in pop tracks or the complex layers of classical compositions, the Macchiato faithfully reproduces rich details and musical nuances. The Macchiato brings your music to life and lets you enjoy the performance whenever you want.

Dynamic in-ear headphones with cable Lithium-magnesium alloy diaphragm: Ultra-lightweight diaphragm with high rigidity for high resolution and rich detail. 1.6T high magnetic flux density: Double magnetic circuit design for powerful sound output and improved frequency response. Helmholtz resonance double cavity: Improves transient response, dynamics and low frequency depth for a live music experience. Stainless steel housing: The mirror-polished PVD housing offers durability, stability and elegance. Oxygen-free, silver-plated copper cable: Interchangeable 3.5 mm/4.4 mm connectors for versatility and improved signal transmission. Interchangeable cable design: Supports 0.78mm 2-pin connectors for flexible upgrades and customisation. Metal Housing The iBasso - Klee features a high-quality stainless steel housing with a mirror-polished finish that combines durability with a jewellery-like aesthetic. The lightweight and compact design ensures a comfortable and secure fit for long listening sessions. Its elegant craftsmanship reflects iBasso's commitment to quality and style. Crossover design Helmholtz resonance dual chamber system optimises sound quality across the entire frequency range. Interchangeable cable system 3.5 mm single-ended and 4.4 mm balanced plugs for flexible connection options. Audiophile-quality cables Silver-plated cables made of oxygen-free copper with a stranded wire structure for high-fidelity audio transmission.